The multiplex table top is 2.1 cm thick and wonderfully complements the stocubo modular shelf system. The height of the table varies and grows or shrinks with the cubes installed below. You can create a desk for the home office or a temporary workbench with a simple turn of the hand (or cube). Of course, the table top can also be combined with common table frames or individual legs.
For a small surcharge, we can also provide the desk top with a cable hole (diameter 6 cm) to banish cable clutter from the desk. Simply select the cable hole option.
In the 131 x 58 cm version, the weight of the table top is 12 kg. The 148 x 78 cm panel weighs 22 kg.
When ordering a desktop, 8 anti-slip pads are included in the price to ensure maximum grip.
As our multiplex panels are a natural product with a melamine resin coating, it can occasionally happen that the cut edge or the grain of the individual multiplex layers show slight color deviations and the coating may not be completely opaque on one side. However, we try to use our resources as sparingly as possible and not to waste wood. That's why we also process these panels, but of course we make sure that the top side of the panel is always flawless.
- outer height
- outer width
- outer depth
- outer volume
- inner height
- inner width
- inner depth
- inner volume
Cubes can be hung by their long and short side using a rail system. Wall mounts are not suitable as anti-tipping devices when stacking shelves.
The maximum load depends on the module: half-depth cubes, which are ideal as, for example, bookshelves or CD racks, can be filled entirely with books or CDs/DVDs. Note: For full-depth shelf modules, we assume a maximum load of 12 kg for the 1:1 module and 5 kg for the 2:1 module.
A 5.5 cm hole to run cables through the back of the cube.
The hole is at the bottom left or right (please specify for modules with doors). The distance between the outer edge of the body and the centre of the hole is 6 cm. You can add your desired cable hole in the shopping trolley at bottom right, and select it for the respective cube.
Put your cubes in the limelight with our integrated lighting and accentuate the aesthetic – day and night! From now on you can get our 1:1 cube with built-in LED lighting on request.
Small lights are attached almost invisibly to the inside of the cube. LEDs are available in super warm white and can be dimmed through ten levels by remote control.
Power is supplied via a power pack, to which six illuminated cubes can be connected. The cable is laid through a tiny hole that we drill in the back wall of the relevant module, so that it's well hidden and invisible from the front. The modules are delivered fully assembled. All you have to do is plug it in and you're done!
Please note that, in addition to your cube with light, you need an LED kit with remote control to switch the light on and off. You can add the LED kit to your order in the shop.
› Here you will find instructions for commissioning your light cubes.
Record shelves according to your musical taste. Create the perfect stage for your favorite LPs.
Configure your individual cube shelf cube by cube. Caesar already suspected: This die will be cast!